Descripción
Technical specifications
- Source: 370W RGB + Warm White LEDs (driven @ 220W)
- Luminous flux: 17’109 @4.000 K with LD filter
- Lux: @4000K, 265lx @5 m
- CRI: 94,2 @3.200 K; 95,4 @5.600 K
- R9: 93,3 @3.200 K; 87,4 @5.600 K
- TLCI: 92 @5.600 K
- TM30 Rf: 90 @3.200 K; 89,4 @5.600 K
- TM30 Rg: 105 @3.200 K; 104 @5.600 K
- Source life expectancy: > 50.000 h
- Beam angle: 102°
- Field angle: 158°
- Lens type: medium density diffusion panel (interchangeable)
- Additional optics: see available accessories
- Colour control: XY, CCT, RGBW, Gel, HSI, Source Emulation, Colour Macros, CTO on colours
- Colour mixing: RGB + Warm White
- CCT: CCT control range from 2.200K to 15.000K, + / – green correction, tungsten emulation
- White presets: 2.800 K – 10.000K with 28 K resolution
- Colour wheel: virtual colour wheel with macros
- Macros: Gels library on-board
- Control Resolution: 16-bit dimmer, colours
- Pixel patterns: pre-programmed pixel macros and cinema lighting effects patterns
- Special features: linear crossfade channel from any white to any colour; virtual CTO on colours
- Body: sturdy die-cast aluminium body
- Body colour: black
- Protocols: DMX512, RDM, W-DMX, rotatory knob
- Stand Alone: selectable mode through 3 rotatory knobs
- Pixel control: 4 section control
- Wireless Control: included, LumenRadio Timo Fx DMX/RDM compatible with both CRMX (Lumen Radio) and W-DMX (Wireless DMX)
- RDM: RDM for remote monitoring and settings
- Display: Graphic User Interface
- Firmware upgrade: via DMX with UPBOXPRO/UPBOX1 (USB-DMX interface not included)
- Dimmer: linear 0 ~ 100% electronic dimmer
- Dimmer curves: 4 selectable dimming modes available
- Strobe / shutter: 1 – 30 Hz, electronic
- Display battery: self-charging battery backup
- Operating temperature: -10° ~ +45° Ta
- LED Control: flicker free frequency with adjustable PWM
- Selectable PWM: 600 ~ 40.000 Hz
- Mains power supply: 100-240V – 50/60Hz
- Low Voltage DC mains: 24-36V
- Max power consumption: 230W
- Output (at 230V): 12 units on a single power line
- Power factor: >0,97
- IP rating: 20
- Cooling: active, silent operation
- Suspension and fixing: bracket for hanging and positioning
- Signal connection: Amphenol XLR 5p IN/OUT connectors
- Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
- Low Voltage DC connector: XLR 4p
- Dimensions (WxHxD): 529x432x144mm / 20.83”x17.01”x5.67”
- Dimensions with PO system (WxHxD): 546x556x144mm / 21.5”x21.89”x5.67”
- Weight: 10,5kg / 23.15lbs
- Weight with PO system: 11,8kg / 26.01lbs
- Certifications / Approvals: CE, UKCA, RCM, cTUVus, FCC
- 1 x ECLPANELTWCJR
- 1 x ECLFRSPG
- 1 x 1,5 meters 3G1,5mmq power cable (BARE END – NEUTRIK POWERCON TRUE1 IP65 power connector)
- User Manual